Section 8: Administration and Privileged Commands
1
A
B
C
D
E
F
G
H
I
K
L
M
N
O
P
R
S
T
U
V
W
Y
Z
Section index
- 1 select-default-ispell(8)
- select default ispell d...
- 1 select-default-wordlist(8)
- select default word...
- a2dismod(8)
- enable or disable an apache2 module
- a2dissite(8)
- enable or disable an apache2 site / virtual host
- a2enmod(8)
- enable or disable an apache2 module
- a2ensite(8)
- enable or disable an apache2 site / virtual host
- ab(8)
- Apache HTTP server benchmarking tool
- accessdb(8)
- dumps the content of a man-db database in a human read...
- acpi_listen(8)
- ACPI event listener
- acpid(8)
- Advanced Configuration and Power Interface event daemon
- add-shell(8)
- add shells to the list of valid login shells
- addgroup(8)
- add a user or group to the system
- addpart(8)
- simple wrapper around the "add partition" ioctl
- adduser(8)
- add a user or group to the system
- adduser.conf(5)
- configuration file for adduser(8) and addgroup(8) .
- agetty(8)
- alternative Linux getty
- apache-modconf(8)
- reconfigure the Apache webserver modules list
- apache2(8)
- Apache Hypertext Transfer Protocol Server
- apache2ctl(8)
- Apache HTTP server control interface
- apachectl(8)
- Apache HTTP server control interface
- apt(8)
- Advanced Package Tool
- apt-cache(8)
- APT package handling utility - cache manipulator
- apt-cdrom(8)
- APT CDROM management utility
- apt-config(8)
- APT Configuration Query program
- apt-get(8)
- APT package handling utility - command-line interface
- apt-key(8)
- APT key management utility
- apt-mark(8)
- mark/unmark a package as being automatically-installed
- apt-secure(8)
- Archive authentication support for APT
- aptitude(8)
- high-level interface to the package manager
- arp(8)
- manipulate the system ARP cache
- aspell-autobuildhash(8)
- Autobuilding aspell hash files for some dicts
- ata_id(8)
- udev callout to read product/serial number from ATA dr...
- atd(8)
- run jobs queued for later execution
- badblocks(8)
- search a device for bad blocks
- biosdecode(8)
- BIOS information decoder
- blkid(8)
- command-line utility to locate/print block device attr...
- blockdev(8)
- call block device ioctls from the command line
- bootlogd(8)
- record boot messages
- catman(8)
- create or update the pre-formatted manual pages
- cdrom_id(8)
- udev callout to determine the capabilities of optical ...
- cfdisk(8)
- Curses/slang based disk partition table manipulator fo...
- chcat(8)
- change file SELinux security category
- check_forensic(8)
- tool to extract mod_log_forensic output from apache lo...
- checkgid(8)
- checks the gid
- checkmodule(8)
- SELinux policy module compiler
- checkpolicy(8)
- SELinux policy compiler
- chgpasswd(8)
- update group passwords in batch mode
- chpasswd(8)
- update passwords in batch mode
- chroot(8)
- run command or interactive shell with special root dir...
- cleanup-info(8)
- clean up the mess that bogus install-info may have done
- clock(8)
- query and set the hardware clock (RTC)
- consolechars(8)
- load EGA/VGA console screen font, screen-font map, and...
- cpgr(8)
- copy with locking the given file to the password or gr...
- cppw(8)
- copy with locking the given file to the password or gr...
- cron(8)
- daemon to execute scheduled commands (Vixie Cron)
- ctrlaltdel(8)
- set the function of the Ctrl-Alt-Del combination
- cytune(8)
- Tune driver parameters for Cyclades-Z multiport serial...
- debugfs(8)
- ext2/ext3 file system debugger
- defoma-reconfigure(8)
- Reconfigure all from zero.
- delgroup(8)
- remove a user or group from the system
- delpart(8)
- simple wrapper around the "del partition" ioctl
- deluser(8)
- remove a user or group from the system
- deluser.conf(5)
- configuration file for deluser(8) and delgroup(8) .
- depmod(8)
- program to generate modules.dep and map files.
- dhclient(8)
- Dynamic Host Configuration Protocol Client
- dhclient-script(8)
- DHCP client network configuration script
- dhclient3(8)
- Dynamic Host Configuration Protocol Client
- dmidecode(8)
- DMI table decoder
- domainname(8)
- set or display name of current domain
- dpkg-divert(8)
- override a package's version of a file
- dpkg-preconfigure(8)
- let packages ask questions prior to their installation
- dpkg-reconfigure(8)
- reconfigure an already installed package
- dpkg-statoverride(8)
- override ownership and mode of files
- dumpe2fs(8)
- dump ext2/ext3 filesystem information
- dwww(8)
- access documentation via WWW
- dwww-build(8)
- build dwww index lists
- dwww-build-menu(8)
- builds dwww Debian Documentation Menu
- dwww-cache(8)
- manage the dwww cache of converted documents
- dwww-convert(8)
- convert files to HTML for dwww
- dwww-find(8)
- find documentation related to a search argument
- dwww-format-man(8)
- batch format manual pages for dwww
- dwww-index++(8)
- build index of registered Debian documentation.
- dwww-quickfind(8)
- find quickly which package a program belongs to.
- dwww-refresh-cache(8)
- rebuilds dwww cache directory
- dwww-txt2html(8)
- simple txt to HTML converter for dwww
- e2fsck(8)
- check a Linux ext2/ext3 file system
- e2image(8)
- Save critical ext2/ext3 filesystem metadata to a file
- e2label(8)
- Change the label on an ext2/ext3 filesystem
- e2undo(8)
- Replay an undo log for an ext2/ext3/ext4 filesystem
- edd_id(8)
- udev callout to identify BIOS disk drives via EDD
- /etc/adduser.conf(5)
- configuration file for adduser(8) and ...
- /etc/deluser.conf(5)
- configuration file for deluser(8) and ...
- ethtool(8)
- Display or change ethernet card settings
- faillog(8)
- display faillog records or set login failure limits
- famd(8)
- The File Alteration Monitor (FAM) daemon
- fdformat(8)
- Low-level formats a floppy disk
- fdisk(8)
- Partition table manipulator for Linux
- filefrag(8)
- report on file fragmentation
- findfs(8)
- Find a filesystem by label or UUID
- fixfiles(8)
- fix file SELinux security contexts.
- fsck(8)
- check and repair a Linux file system
- fsck.ext2(8)
- check a Linux ext2/ext3 file system
- fsck.ext3(8)
- check a Linux ext2/ext3 file system
- fsck.ext4(8)
- check a Linux ext2/ext3 file system
- fsck.ext4dev(8)
- check a Linux ext2/ext3 file system
- fsck.minix(8)
- a file system consistency checker for Linux
- fsck.nfs(8)
- Dummy fsck.nfs script that always returns success.
- gconf-schemas(8)
- register gconf schemas with the gconf database
- getkeycodes(8)
- print kernel scancode-to-keycode mapping table
- getty(8)
- alternative Linux getty
- gpm(8)
- a cut and paste utility and mouse server for virtual c...
- gpm-mouse-test(8)
- a tool for determining mouse type and device it's atta...
- groupadd(8)
- create a new group
- groupdel(8)
- delete a group
- groupmod(8)
- modify a group definition on the system
- grpck(8)
- verify integrity of group files
- grpconv(8)
- convert to and from shadow passwords and groups
- grpunconv(8)
- convert to and from shadow passwords and groups
- grub(8)
- the grub shell
- grub-install(8)
- install GRUB on your drive
- grub-md5-crypt(8)
- Encrypt a password in MD5 format
- grub-reboot(8)
- manual page for grub-reboot 0.01
- grub-terminfo(8)
- Generate a terminfo command from a terminfo name
- gssd(8)
- rpcsec_gss daemon
- hald(8)
- HAL daemon
- halt(8)
- stop the system.
- htcacheclean(8)
- Clean up the disk cache
- httxt2dbm(8)
- Generate dbm files for use with RewriteMap
- hwclock(8)
- query and set the hardware clock (RTC)
- i386(8)
- change reported architecture in new program environmen...
- iconvconfig(8)
- Create fastloading iconv module configuration file
- identd(8)
- TCP/IP IDENT protocol server
- idmapd(8)
- NFSv4 ID <-> Name Mapper
- ifconfig(8)
- configure a network interface
- ifdown(8)
- take a network interface down
- ifup(8)
- bring a network interface up
- ikeygen(8)
- Generate a random DES key
- inetd(8)
- internet super-server
- init(8)
- process control initialization
- initramfs-tools(8)
- an introduction to writing scripts for mkinitramfs
- insmod(8)
- simple program to insert a module into the Linux Kernel
- install-docs(8)
- manage online Debian documentation
- install-info(8)
- create or update entry in Info dir file
- install-keymap(8)
- expand a given keymap and install it as boot-time keymap
- install-sgmlcatalog(8)
- maintain transitional SGML catalog
- installkernel(8)
- install a new kernel image
- intro(8)
- Introduction to administration and privileged commands
- invoke-rc.d(8)
- executes System-V style init script actions
- ip6tables(8)
- IPv6 packet filter administration
- ip6tables-restore(8)
- Restore IPv6 Tables
- ip6tables-save(8)
- Save IPv6 Tables
- iptables(8)
- administration tool for IPv4 packet filtering and NAT
- iptables-apply(8)
- a safer way to update iptables remotely
- iptables-restore(8)
- Restore IP Tables
- iptables-save(8)
- Save IP Tables
- iptables-xml(8)
- Convert iptables-save format to XML
- iptraf(8)
- Interactive Colorful IP LAN Monitor
- isosize(8)
- outputs the length of a iso9660 file system
- ispell-autobuildhash(8)
- Autobuilding the ispell hash file for some dicts
- ispellconfig(8)
- Bash script to select a new ispell default dictionary.
- kbd-config(8)
- Configure the console keyboard
- kbdrate(8)
- reset the keyboard repeat rate and delay time
- killall5(8)
- send a signal to all processes.
- klogd(8)
- Kernel Log Daemon
- laptop-detect(8)
- attempt to detect a laptop
- lastlog(8)
- reports the most recent login of all users or of a giv...
- ld-linux(8)
- dynamic linker/loader
- ld-linux.so(8)
- dynamic linker/loader
- ld.so(8)
- dynamic linker/loader
- ld.so/ld-linux.so(8)
- dynamic linker/loader
- ldconfig(8)
- configure dynamic linker run-time bindings
- lft(8)
- print the route packets trace to network host
- lft.db(8)
- print the route packets trace to network host
- load_policy(8)
- load a new SELinux policy into the kernel
- locale-gen(8)
- generates localisation files from templates
- logresolve(8)
- Resolve IP-addresses to hostnames in Apache log files
- logrotate(8)
- rotates, compresses, and mails system logs
- logsave(8)
- save the output of a command in a logfile
- losetup(8)
- set up and control loop devices
- lsmod(8)
- program to show the status of modules in the Linux Kernel
- lsof(8)
- list open files
- lspci(8)
- list all PCI devices
- lsusb(8)
- list USB devices
- make-ssl-cert(8)
- Debconf wrapper for openssl
- makedbm(8)
- create or dump a ypserv database file
- MAKEDEV(8)
- create devices
- mandb(8)
- create or update the manual page index caches
- mii-tool(8)
- view, manipulate media-independent interface status
- mk_modmap(8)
- translate a Linux keytable file into an xmodmap file
- mkboot(8)
- makes a bootdisk
- mke2fs(8)
- create an ext2/ext3 filesystem
- mkfs(8)
- build a Linux file system
- mkfs.bfs(8)
- make an SCO bfs filesystem
- mkfs.ext2(8)
- create an ext2/ext3 filesystem
- mkfs.ext3(8)
- create an ext2/ext3 filesystem
- mkfs.ext4(8)
- create an ext2/ext3 filesystem
- mkfs.ext4dev(8)
- create an ext2/ext3 filesystem
- mkfs.minix(8)
- make a Linux MINIX filesystem
- mkinitramfs(8)
- low-level tool for generating an initramfs image
- mkinitramfs-kpkg(8)
- generates an initramfs image for kernel-package
- mklost+found(8)
- create a lost+found directory on a mounted Linux secon...
- mknetid(8)
- generate data for netid map
- mkswap(8)
- set up a Linux swap area
- modinfo(8)
- program to show information about a Linux Kernel module
- modprobe(8)
- program to add and remove modules from the Linux Kernel
- modules-config(8)
- reconfigure the Apache webserver modules list
- mount(8)
- mount a file system
- mount.nfs(8)
- mount a Network File System
- mtr(8)
- a network diagnostic tool
- mysqld(8)
- the MySQL server
- mysqlmanager(8)
- the MySQL Instance Manager
- nameif(8)
- name network interfaces based on MAC addresses
- netstat(8)
- Print network connections, routing tables, interface s...
- newusers(8)
- update and create new users in batch
- nfsstat(8)
- list NFS statistics
- nisdomainname(8)
- set or display name of current NIS(YP) domain
- nologin(8)
- politely refuse a login
- ntp-keygen(8)
- generate public and private keys
- ntp-wait(8)
- wait for NTP server to synchronize
- ntpd(8)
- Network Time Protocol (NTP) daemon
- ntpdate(8)
- set the date and time via NTP
- ntpdate-debian(8)
- set the date and time via NTP
- ntptime(8)
- read kernel time variables
- nullmailer-queue(8)
- insert mail messages into the queue
- nullmailer-send(8)
- Send queued messages
- open_init_pty(8)
- run an program under a psuedo terminal
- ownership(8)
- Compaq ownership tag retriever
- pam_access(8)
- PAM module for logdaemon style login access control
- pam_cracklib(8)
- PAM module to check the password against dictionary words
- pam_debug(8)
- PAM module to debug the PAM stack
- pam_deny(8)
- The locking-out PAM module
- pam_echo(8)
- PAM module for printing text messages
- pam_env(8)
- PAM module to set/unset environment variables
- pam_exec(8)
- PAM module which calls an external command
- pam_faildelay(8)
- Change the delay on failure per-application
- pam_filter(8)
- PAM filter module
- pam_ftp(8)
- PAM module for anonymous access module
- pam_getenv(8)
- get environment variables from /etc/environment
- pam_group(8)
- PAM module for group access
- pam_issue(8)
- PAM module to add issue file to user prompt
- pam_keyinit(8)
- Kernel session keyring initialiser module
- pam_lastlog(8)
- PAM module to display date of last login
- pam_limits(8)
- PAM module to limit resources
- pam_listfile(8)
- deny or allow services based on an arbitrary file
- pam_localuser(8)
- require users to be listed in /etc/passwd
- pam_loginuid(8)
- Record user's login uid to the process attribute
- pam_mail(8)
- Inform about available mail
- pam_mkhomedir(8)
- PAM module to create users home directory
- pam_motd(8)
- Display the motd file
- pam_namespace(8)
- PAM module for configuring namespace for a session
- pam_nologin(8)
- Prevent non-root users from login
- pam_permit(8)
- The promiscuous module
- pam_rhosts(8)
- The rhosts PAM module
- pam_rootok(8)
- Gain only root access
- pam_securetty(8)
- Limit root login to special devices
- pam_selinux(8)
- PAM module to set the default security context
- pam_sepermit(8)
- PAM module to allow/deny login depending on SELinux en...
- pam_shells(8)
- PAM module to check for valid login shell
- pam_succeed_if(8)
- test account characteristics
- pam_tally(8)
- The login counter (tallying) module
- pam_time(8)
- PAM module for time control access
- pam_tty_audit(8)
- Enable or disable TTY auditing for specified users
- pam_umask(8)
- PAM module to set the file mode creation mask
- pam_unix(8)
- Module for traditional password authentication
- pam_userdb(8)
- PAM module to authenticate against a db database
- pam_warn(8)
- PAM module which logs all PAM items if called
- pam_wheel(8)
- Only permit root access to members of group wheel
- pam_xauth(8)
- PAM module to forward xauth keys between users
- paperconfig(8)
- configure the system default paper size
- partx(8)
- telling the kernel about presence and numbering of on-...
- path_id(8)
- udev callout to create a device path based unique name...
- pcimodules(8)
- List kernel driver modules available for all currently...
- pg_createcluster(8)
- create a new PostgreSQL cluster
- pg_ctlcluster(8)
- start/stop/restart/reload a PostgreSQL cluster
- pg_dropcluster(8)
- completely delete a PostgreSQL cluster
- pg_maintenance(8)
- perform maintenance tasks on all clusters
- pg_upgradecluster(8)
- upgrade an existing PostgreSQL cluster to a new major...
- pidof(8)
- find the process ID of a running program.
- ping(8)
- send ICMP ECHO_REQUEST to network hosts
- ping6(8)
- send ICMP ECHO_REQUEST to network hosts
- pivot_root(8)
- change the root file system
- pkcs11-helper(8)
- Simplified PKCS#11 library.
- pkcs11-helper-1(8)
- Simplified PKCS#11 library.
- plipconfig(8)
- fine tune PLIP device parameters
- pm-action(8)
- Suspend or Hibernate your computer
- pm-hibernate(8)
- Suspend or Hibernate your computer
- pm-powersave(8)
- Put your computer into low power mode
- pm-suspend(8)
- Suspend or Hibernate your computer
- pm-suspend-hybrid(8)
- Suspend or Hibernate your computer
- pmap_dump(8)
- print a list of all registered RPC programs
- pmap_set(8)
- set the list of registered RPC programs
- portmap(8)
- DARPA port to RPC program number mapper
- poweroff(8)
- stop the system.
- pwck(8)
- verify integrity of password files
- pwconv(8)
- convert to and from shadow passwords and groups
- pwunconv(8)
- convert to and from shadow passwords and groups
- pwupdate(8)
- updates passwd and shadow NIS map
- ramsize(8)
- query/set image root device, RAM disk size, or video mode
- rarp(8)
- manipulate the system RARP table
- raw(8)
- bind a Linux raw character device
- rdev(8)
- query/set image root device, RAM disk size, or video mode
- reboot(8)
- stop the system.
- remove-default-ispell(8)
- remove default ispell dictionary
- remove-default-wordlist(8)
- remove default wordlist
- remove-shell(8)
- remove shells from the list of valid login shells
- resize2fs(8)
- ext2/ext3 file system resizer
- restorecon(8)
- restore file(s) default SELinux security contexts.
- restorecond(8)
- daemon that watches for file creation and then sets th...
- revnetgroup(8)
- generate reverse netgroup data
- rmmod(8)
- simple program to remove a module from the Linux Kernel
- rmt(8)
- remote magtape protocol module
- rmt-tar(8)
- remote magtape protocol module
- rootflags(8)
- query/set image root device, RAM disk size, or video mode
- rotatelogs(8)
- Piped logging program to rotate Apache logs
- route(8)
- show / manipulate the IP routing table
- rpc.gssd(8)
- rpcsec_gss daemon
- rpc.idmapd(8)
- NFSv4 ID <-> Name Mapper
- rpc.statd(8)
- NSM status monitor
- rpc.yppasswdd(8)
- NIS password update daemon
- rpc.ypxfrd(8)
- NIS map transfer server
- rpcdebug(8)
- set and clear NFS and RPC kernel debug flags
- rpcinfo(8)
- report RPC information
- rtcwake(8)
- enter a system sleep state until specified wakeup time
- run-parts(8)
- run scripts or programs in a directory
- run_init(8)
- run an init script in the proper SELinux context
- runlevel(8)
- find the previous and current system runlevel.
- rvnamed(8)
- reverse name resolution daemon for iptraf (8)
- safe_finger(8)
- finger client wrapper that protects against nasty stuf...
- savelog(8)
- save a log file
- scsi_id(8)
- retrieve and generate a unique SCSI identifier
- se_apt-get(8)
- run a Debian package system programs in the proper sec...
- se_aptitude(8)
- run a Debian package system programs in the proper sec...
- se_dpkg(8)
- run a Debian package system programs in the proper sec...
- se_dpkg-reconfigure(8)
- run a Debian package system programs in the proper ...
- se_dselect(8)
- run a Debian package system programs in the proper sec...
- se_synaptic(8)
- run a Debian package system programs in the proper sec...
- seaudit(8)
- SELinux graphical audit log analysis tool
- seaudit-report(8)
- SELinux audit log reporting tool
- select-default-ispell(8)
- select default ispell dictionary
- select-default-wordlist(8)
- select default wordlist
- semanage(8)
- SELinux Policy Management tool
- semodule(8)
- Manage SELinux policy modules.
- semodule_deps(8)
- show the dependencies between SELinux policy packages.
- semodule_expand(8)
- Expand a SELinux policy module package.
- semodule_link(8)
- Link SELinux policy module packages together
- semodule_package(8)
- Create a SELinux policy module package.
- sestatus(8)
- SELinux status tool
- setarch(8)
- change reported architecture in new program environmen...
- setfiles(8)
- set file SELinux security contexts.
- setkeycodes(8)
- load kernel scancode-to-keycode mapping table entries
- setlogcons(8)
- Send kernel messages to console N
- setpci(8)
- configure PCI devices
- setsebool(8)
- set SELinux boolean value
- setvesablank(8)
- Turn VESA screen blanking on or off
- sfdisk(8)
- Partition table manipulator for Linux
- sftp-server(8)
- SFTP server subsystem
- shadowconfig(8)
- toggle shadow passwords on and off
- showmount(8)
- show mount information for an NFS server
- shutdown(8)
- bring the system down
- slattach(8)
- attach a network interface to a serial line
- squirrelmail-configure(8)
- Interactively configure SquirrelMail
- ssh-keysign(8)
- ssh helper program for host-based authentication
- sshd(8)
- OpenSSH SSH daemon
- start-stop-daemon(8)
- start and stop system daemon programs
- startpar(8)
- start runlevel scripts in parallel
- statd(8)
- NSM status monitor
- suexec(8)
- Switch User For Exec
- sulogin(8)
- Single-user login
- svnserve(8)
- Server for the 'svn' repository access method
- swapoff(8)
- enable/disable devices and files for paging and swapping
- swapon(8)
- enable/disable devices and files for paging and swapping
- sync(8)
- synchronize data on disk with memory
- sync-available(8)
- sync dpkg's available database with apt's database
- sysctl(8)
- configure kernel parameters at runtime
- sysctl.conf(5)
- sysctl(8) preload/configuration file
- sysklogd(8)
- Linux system logging utilities.
- syslog-facility(8)
- Setup and remove LOCALx facility for sysklogd
- syslog.conf(5)
- syslogd(8) configuration file
- syslogd(8)
- Linux system logging utilities.
- syslogd-listfiles(8)
- list system logfiles
- tasksel(8)
- a user interface for installing tasks
- tcpd(8)
- access control facility for internet services
- tcpdchk(8)
- tcp wrapper configuration checker
- tcpdmatch(8)
- tcp wrapper oracle
- tcpdump(8)
- dump traffic on a network
- tcptraceroute(8)
- print the route packets trace to network host
- tcptraceroute.db(8)
- print the route packets trace to network host
- telinit(8)
- process control initialization
- traceproto(8)
- print the route packets trace to network host
- traceproto.db(8)
- print the route packets trace to network host
- traceroute(8)
- print the route packets trace to network host
- traceroute-nanog(8)
- print the route packets trace to network host
- traceroute-nanog.db(8)
- print the route packets trace to network host
- traceroute.db(8)
- print the route packets trace to network host
- traceroute6(8)
- print the route packets trace to network host
- traceroute6.db(8)
- print the route packets trace to network host
- tracert(8)
- print the route packets trace to network host
- tracert.db(8)
- print the route packets trace to network host
- try-from(8)
- test program for the tcp_wrapper
- tune2fs(8)
- adjust tunable filesystem parameters on ext2/ext3 file...
- tunelp(8)
- set various parameters for the lp device
- tzselect(8)
- select a time zone
- udevadm(8)
- udev management tool
- udevd(8)
- event managing daemon
- udevinfo(8)
- query device information from the udev database
- udevsettle(8)
- wait until queued kernel/udev events are handled
- ulogd(8)
- netfilter/iptables ULOG daemon
- umount(8)
- unmount file systems
- umount.nfs(8)
- unmount a Network File System
- unix_chkpwd(8)
- Helper binary that verifies the password of the curren...
- unix_update(8)
- Helper binary that updates the password of a given user
- update-alternatives(8)
- maintain symbolic links determining default commands
- update-ca-certificates(8)
- update /etc/ssl/certs and certificates.crt
- update-catalog(8)
- create or update entry in SGML catalog file
- update-default-aspell(8)
- rebuild aspell database and emacsen stuff
- update-default-ispell(8)
- update default ispell dictionary
- update-default-wordlist(8)
- update default wordlist
- update-dictcommon-aspell(8)
- rebuild aspell database and emacsen stuff
- update-fonts-alias(8)
- compile fonts.alias files
- update-fonts-dir(8)
- compile fonts.dir files
- update-fonts-scale(8)
- generate fonts.scale files
- update-gconf-defaults(8)
- generate GConf defaults shipped in Debian packages
- update-gdkpixbuf-loaders(8)
- Update wrapper script for the Gdkpixbuf loader...
- update-grub(8)
- program to generate GRUB's menu.lst file
- update-gtk-immodules(8)
- Update wrapper script for the GTK+ IM modules list
- update-icon-caches(8)
- Update wrapper script for the icon caches
- update-inetd(8)
- create, remove, enable or disable entry in /etc/inetd....
- update-initramfs(8)
- generate an initramfs image
- update-ispell-dictionary(8)
- Bash script to select a new ispell default dic...
- update-locale(8)
- Modify global locale settings
- update-mime(8)
- create or update MIME information
- update-modules(8)
- obsolete command
- update-openoffice-dicts(8)
- rebuild dictionary.lst for OpenOffice.org
- update-passwd(8)
- safely update /etc/passwd, /etc/shadow and /etc/group
- update-pciids(8)
- download new version of the PCI ID list
- update-python-modules(8)
- byte-compile python modules
- update-rc.d(8)
- install and remove System-V style init script links
- update-usbids(8)
- download new version of the USB ID list
- update-xmlcatalog(8)
- maintain XML catalog files
- uptimed(8)
- daemon to record uptime records
- uptimed.conf(5)
- The configuration file for uptimed(8)
- useradd(8)
- create a new user or update default new user information
- userdel(8)
- delete a user account and related files
- usermod(8)
- modify a user account
- uuidd(8)
- UUID generation daemon
- validlocale(8)
- Test if a given locale is available
- vidmode(8)
- query/set image root device, RAM disk size, or video mode
- vigr(8)
- edit the password, group, shadow-password or shadow-gr...
- vipw(8)
- edit the password, group, shadow-password or shadow-gr...
- vmstat(8)
- Report virtual memory statistics
- vol_id(8)
- probe filesystem type and read label and uuid
- vpddecode(8)
- VPD structure decoder
- vsftpd(8)
- Very Secure FTP Daemon
- writevt(8)
- put text into the input buffer of a virtual terminal
- ypbind(8)
- NIS binding process
- ypdomainname(8)
- set or display name of current NIS(YP) domain
- yphelper(8)
- helper application for internal use
- ypinit(8)
- NIS database install and build program
- yppasswdd(8)
- NIS password update daemon
- yppoll(8)
- return version and master server of a NIS map
- yppush(8)
- force propagation of changed NIS databases
- ypserv(8)
- NIS server
- ypset(8)
- bind ypbind to a particular NIS server
- yptest(8)
- test NIS configuration
- ypxfr(8)
- transfer NIS database from remote server to local host
- ypxfrd(8)
- NIS map transfer server
- zic(8)
- time zone compiler
1
A
B
C
D
E
F
G
H
I
K
L
M
N
O
P
R
S
T
U
V
W
Y
Z